Latest Products https://www.devengineparts.com Latest Products Tue, 17 May 2022 07:38:57 +0530 en-us https://www.devengineparts.com Engine Valve https://www.devengineparts.com/engine-valve.htm https://www.devengineparts.com/engine-valve.htm Thu, 03 Mar 2022 00:00:00 +0530 Metal Bushes https://www.devengineparts.com/metal-bushes.htm https://www.devengineparts.com/metal-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 Engine Inlet Valve https://www.devengineparts.com/engine-inlet-valve.htm https://www.devengineparts.com/engine-inlet-valve.htm Thu, 03 Mar 2022 00:00:00 +0530 We are one of the eminent valve guide manufacturers and suppliers in India, who manufacture and supply a wide range of valve guide. The valve guide offered by us is manufactured from optimum quality raw material, so as to ensure the quality & durability of the final product. We provide comprehensive range of quality engine valve guide, which can be used in different engines. We manufacture and supply a wide range of valve guides widely used for automobiles, tractors, industrial &  diesel engines. We manufacture valve guide in various material depend on :- Customer requirement Type & Size of engine Engine R.P.M. & effort of engine Their application where used Material of Valve Guide as we use :- Copper zinc alloy Phosphorous Bronze and leaded bronze Manganese Bronze Aluminium Bronze (North American UNS C95400, German CuAI10Fe, British AB1) for high temperature applications. Gun Metal Alloy Graded Cast Iron of 25 & 30 Grade. This Cast Iron is specially made for High Racing Engine. Tin Bronze (North American UNS C90500, German CuSn10Zn, British G1) for piston airplane engines.   Cast Iron is a general term applied to a wide range of iron carbon alloys. Their carbon content is such as to cause some liquid of eutectic composition to solidify. The maximum carbon content is therefore about 2% while the practical maximum is about 4.3%Cast Iron should not be thought of as metal having single element. It should at least posses’ six elements. These are iron, carbon, silicon, manganese, phosphorus and sulphur.Some of the important mechanical properties Brinell Hardness Number (b.h.n) = 150 to 225 It is a brittle material. It cannot be beaten in sheets or rolled or forged. Hence it is not a malleable material Various types of Cast Iron are as follows: Grey Cast Iron White Cast Iron Mottled Cast Iron Malleable Cast Iron Spheroidal Grey Iron (s.g.iron) Inoculated Cast Iron Alloy Cast Iron Addition of nickel to cast iron produces fine grains, helps formation of graphite and prevents formation of white hard iron nickel & copper ensure an austenitic structure. Chromium and silicon add resistance to scaling. The microstructure of iron is stabilized and formation of fine graphite is promoted by the addition of chromium. The matrix of cast iron is strengthened through promotion of the fine pearlite by the addition of molybdenum.Valves developed from CuZnAl-alloy & grey cast iron alloy with high phosphorous content to offer high wear resistance as well as improver the years working properties in poor lubrication conditions. The inner bore of these valve  guides is finished to perfect size, not usually done by competitors.CuZnAl-alloy Guides are with excellent wear resistance and low coefficient of friction. Used for highest stressed guides.  While developing these valve guides, we pay care full attention to the accurate dimensions, so that they could meet with the OEM standards. Our valve guide has hardness in range of 160 225 BHN. ValveGuide has microstructure of matrix pearlite with 5% free ferrite. We also provide thread or spiral in inner diameter of valve guide to retain oil for long time between valve and valve guide & increase life both. Our valve guide are grounded to a surface finish 0.80 micro ra value on its outer dia & maintain outer diameter within tolerance of 12 microns. Our valve guide has Super Finish Bore. Engine Exhaust Valve https://www.devengineparts.com/engine-exhaust-valve.htm https://www.devengineparts.com/engine-exhaust-valve.htm Thu, 03 Mar 2022 00:00:00 +0530 We offer an all encompassing range of valves, which contains intake valves, exhaust valves and engine valves. Our engine valves are manufactured  using superior quality chrome plating / valve steel series- EN18D, EN24, EN52, EN54, EN59(214N) (Non-Magnetic/Bimetal) with varied hardness  from 20HRC to 50HRC. Available in over sizes, these engine valves are extensively used in automobiles, tractors, industrial & diesel engines,  generators and two wheelers.Our intake and exhaust valves are manufactured from a variety of materials to be operated under different conditions. These valves are manufactured  using super Material Carbon steel, martens tic steel with chrome and silicon, stainless martensitic, stainless austenitic, Inconel and Nimonic. These valves are available in different dimensions & material as per the usage and the application of the valve.Normally, our intake valves are manufactured from high quality alloy steel, as these valves are not exposed to the corrosive action of the hot exhaust  gases. Consequentially, these intake valves provide the users long time hassle free service. For manufacturing exhaust valves, we use chromium  silicon, which makes them resist to corrosion due to high temperature and hot gases.Various type of heat treatments its definition and objectiveIt is defined as an operation or combination of different operations involving heating and cooling of metal or an alloy in solid state for the purpose of  obtaining certain required structures and desirable properties of a combination of properties suitable for the particular application.Heat treatment is carried out to achieve one or more of the following objects: To relieve the stresses set up in the material after hot or cold working in order to improve machine ability. To improve mechanical properties like tensile strength, hardness, ductility, shock resistance etc. To modify the structure of the material to improve its electrical and magnetic properties. To increase the qualities of a metal to provide better resistance to heat, corrosion and wear. Following heat treatment processes are mainly in use for achieving most of the objects of heat treatment: Annealing Spheroidising Normalising Hardening Tempering Case hardening or surface hardening Carburising Nitriding Cyaniding Induction hardening Flame hardening Bimetal Bushes https://www.devengineparts.com/bimetal-bushes.htm https://www.devengineparts.com/bimetal-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Automobiles (Cars, Trucks, Tractors) Diesel Engines, Marine Engines, Railways (Locomotives), Earth Movers, Compressors, Generators other rotating & reciprocating machinery. We manufacture these bushings Through sintering or Centrifugal Casting which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity in some of the Products.We manufacture Bushings From Following Material : Steel Back - SAE 1008 or SAE 1010 Linning Alloy - SAE 792, SAE 797, SAE 793, SAE 794, SAE 799, SAE 64 These Bushings are widely used in Leaf Spring Eye / Shackle Bushings, Connecting Rod Small End Bush, Piston Pin Bushings, Valve Rocker Bushings, Piston Pin Bushings application.Steel backed Leaded Bronze Alloy References : DIN CuPb10Sn, SAE797, JIS-LBC3, UNS C93700, Clevite F100, Daldo L10, D.A.B.D57, federal Mogul / Talho HF2, Glacler GGB SY, Glyco66, Miba2·1010, Kart Schmidt Ds94OS, ACL F100,SAE792, CuPb24Sn4, SAE799, RS-LBC6, DAIDO L23,JIS-LBC6, GLYCO-68, ACL-F250, SAE794 Bronze Bushes https://www.devengineparts.com/bronze-bushes.htm https://www.devengineparts.com/bronze-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 Gunmetal Bushes https://www.devengineparts.com/gunmetal-bushes.htm https://www.devengineparts.com/gunmetal-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 We are manufacturer and supplier of Gunmetal Bushing and our product is made up of good quality. Bushes, includes Gunmetal, Bronze, Leaded Bronze, Leaded Tin Bronze and Tin Bronze.These Bronze metal products are widely demanded by the customers owing to their High ductile Strength, precision manufacturing, and reliability. These products can be procured by the clients at industry leading rates and they can customize their orders according to their needs and specifications. Our products are high in demads from developed countries likes US, Europe and Australia due to our high Material quality, Dimentional accuracy and shell concentricity. Features : Pocket-friendly prices Varied patterns Completely Tested ((Materail, Dimentional, DP) Tin-Based Babbitt Bushes https://www.devengineparts.com/tin-based-babbitt-bushes.htm https://www.devengineparts.com/tin-based-babbitt-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Railways (Locomotives), Compressors, Turbines, High Pressure Pumps, homogenizer, other rotating & reciprocating machinery. We manufacture these bushings Through Centrifugal Casting which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity.   We manufacture Bushings From Following Material--- STEEL Back - SAE 1008 or SAE 1010 Linning Alloy - SAE12,  SAE14, SAE15, GR84, GR90   These Bushings are widely used in Leaf Spring Eye / Shackle Bushings, Connecting Rod Small End Bush, Piston Pin Bushings, Valve Rocker Bushings, Piston Pin Bushings application.   Steel Backed Lead base Babbitt Alloy References: SAE 15, CLEVITE F23, FEDERAL MOGUL L 200, GLYCO 24 Steel backed Tin base Babbitt Alloy References: SAE 12, CLEVITE F1, FEDERAL MOGUL B 100, GLYCO 38  Cylinder Sleeves https://www.devengineparts.com/cylinder-sleeves.htm https://www.devengineparts.com/cylinder-sleeves.htm Thu, 03 Mar 2022 00:00:00 +0530 We also accept the customized orders of our clients and manufacture these products in accordance with the samples and drawings with the given material & coating. Cylinder Sleeves, made of gray cast-iron, ought to have desired casting and machining qualities, viz. strength, toughness, hardness and wear resistance. These are mainly of two types – Dry sleeves and Wet sleeves. The sleeves are ‘cast-in fit’, force (press) fit or slip fit. The interference between its outer diameter and bore-hole walls depends on fit-type from 0.050 to 0.075 mm. These are available in wide range suitable for light, medium and heavy duty application.In order to meet with industrial quality standards, we manufacture these sleeves from sand casting and centrifugal casting, which enables us to maintain the uniform hardness all over. Apart from this, we also keep into consideration various factors including distortion-less bore and low  thermal expansion to meet with the requirements of our clients. These sleeves are available in semi finished as well as full finished sizes.  Cross honing is done on the full finished products to make the inner bore distortion-less. The inner bores are cross honed to provide maximum  smoothness to the surface, that in turn reduces friction, when this inner bore is contacted with Piston Rings.Quality: A very good plateau honing and cylindrical grinding that matches the geometrical parameters. Manufactured with chromium and nickel elements maintaining the BS4K6 material standard. Stringent material along with microstructure analysis of all the batches individually. Complete dimensional inspection of the finished components included in the process. Inspection of honing angle, structure and surface roughness at a random. Tests of profiles, tensile strength and crack detection at regular intervals in a random way. Manufacturing experience for the past 25 years and an expertise with single roof manufacturing outlet. A very wide range and suitable for up to 1500 models for worldwide cars, trucks, tractors and industrial engines. Process In the centrifugal casting process, the molten metal is poured into a metal mould or die which is revolving at a high speed. The centrifugal force  causes the metal to distribute itself evenly around the die. The resulting casting are of much finer grain and free from blow holes or porosity. A further  important advantage is that the impurities, being lighter than the iron, are forced centrifugally to the bore surface from which they are removed by machining. Cylinder Engine Block https://www.devengineparts.com/cylinder-engine-block.htm https://www.devengineparts.com/cylinder-engine-block.htm Thu, 03 Mar 2022 00:00:00 +0530 We have vast range of Cylinder Heads & Blocks for various types of Automobiles Engines, Diesel Generator, Industrial Engines, Marine Engines, Air Compressors, Locomotive & Engines Applications. cylinder heads from factories having zero defect programs company wide as an essential element for development and growth. Under the same roof we melt, mould, sand cast, finish, machine, inspect, pack and dispatch fully machined ready to use heads hence ensuring better control and co-ordination. Smooth finish texture and finless castings are obtained by the process of shot blasting, air blasting and high degree of pre dispatch inspection. A unique combination of GPM'S, SPM'S and CNC machines complimented by accurate jigs and fixtures give our products the desired quality and optimum performance. Machine shops are well equipped with most modern manufacturing and testing facilities such as Composition testing, Hardness testing, Complete CNC machining, Hydraulic Water Leakage Testing & Fitment Testing.We manufacture and supply a comprehensive range of cylinder Heads & blocks, which are widely popular amidst OEM manufacturers all over the world. These cylinder blocks are exceedingly used in air compressors, industrial engines and tractors. We use superior quality gray Cast-Iron (CI) , suitable for wet-sleeved and non-sleeved engines. CI Casting and shell molding for manufacturing them, which impart them optimum durability. The process cause wear resisting close grained iron casting and this ensures long life and efficient cooling. These cylinder blocks are engineered using state-of-the-art machinery to achieve the perfection level to suit our global clients. In order to provide each piece virtually distortion less inner bore, we also perform cross-line boring. These cylinder blocks are available in the dimensions ranging from 50mm. We are also regular O.E. Supplier of various types of "Cylinder Head" to world leaders in Diesel Engine & Compressors Industries. We have manufactured "Cylinder Head" from 1 Kg to 600 Kg one piece casting. The capacity is flexible enough to produce any kind of medium to large Cylinder Head & Block this enables us to customize these products according to the drawings and samples of our clients. Piston Pin https://www.devengineparts.com/piston-pin.htm https://www.devengineparts.com/piston-pin.htm Thu, 03 Mar 2022 00:00:00 +0530 We offer a extensive range of high quality piston pins, which find applications in diesel and industrial engines, Main Engines, industrial engines, automobiles, tractors, air & gas compressors. Piston pins offered by us are manufactured using the utmost advanced machinery to provide them precision dimensions. Further, we develop these piston pins from alloy steel of super grade (15MnCr3, 20MnCr5, etc), which ensures their reliable quality and trouble free performance. We manufacture these piston pins in different dimensions ranging. These piston pins are engineered in the hardness of 55HRC to 70HRC and can also be availed in other hardness also as per the customers' needs or OEM specifications. A Piston Pin / Wrist Pin is a component in all kinds of engines (diesel, gasoline, 2 stroke and 4 stroke). It functions as the linkage between the piston and its gadget and bears the twist and friction incurred by the running engine. auto parts Provides a Piston Pins, Filters & Filters Assemblies, Automotive Piston Rings, Auto Piston Rings India Gudgeon Pin is a component to fasten the Piston and the connecting rod severally and securely, but at the same time permitting enough play for the free angular movement of the connecting rod according to the requirements of kinematics of the Engine assembly. Other than the precision of the size, adequate heat treatment process and surface polishing grinding is also important. These processes enhance the wearing of the piston pins and require certain level of technical support. Our company professes in providing all kinds of piston and crankshaft pins. Stationary Diesel Engine https://www.devengineparts.com/stationary-diesel-engine.htm https://www.devengineparts.com/stationary-diesel-engine.htm Thu, 03 Mar 2022 00:00:00 +0530 Engine Parts https://www.devengineparts.com/engine-parts.htm https://www.devengineparts.com/engine-parts.htm Wed, 05 Jan 2022 00:00:00 +0530 Aluminium Bushes https://www.devengineparts.com/aluminium-bushes.htm https://www.devengineparts.com/aluminium-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 We are an acclaimed name engaged in offering our precious clients a superior quality range of Turned Aluminium Bushes. These bushes are manufactured using supreme grade metal and ultra-modern machines under the surveillance of trained professionals. We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Automobiles (Cars, Trucks, Tractors) Diesel Engines, Marine Engines, Railways (Locomotives), Earth Movers, Compressors, Generators other rotating & reciprocating machinery. We manufacture these bushings Through Die Casting or extrusion which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity in some of the Products.Our offered bushes are made available in different specifications of sizes and dimensions to meet vast necessities of our clients. We offer these bushes to our clients at market leading prices.Features : Dimensional accuracy Unmatched quality Excellent finish Durability Sturdiness DU Type Bushes https://www.devengineparts.com/du-bushes.htm https://www.devengineparts.com/du-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 DU and DUB Type Dry Bush & Bearings  (Oil Free) take advantage of the outstanding dry bearing properties of Polytetrafluoroethylene (PTFE) and combines them with strength, stability and good wear resistance, excellent heat conductivity and low thermal expansion. All our Bushings are sold under our "Dev Brand Engine Spares"  Brand DU Type consists of three bonded layers: A steel backing strip and a porous bronze matrix, impregnated and overlaid with the PTFE/ lead bearing material. 1. PTFE           0.01~0.03mm 2. Porous bronze 0.2~0.3 mm 3. Steel / Bronze backing 0.7~2.3 mm 4. Tin-plating  0.005 mm or                            5. copper plating 0.008mm DUB Type also consists of three layers: --- Bronze backing replacing the steel backing strip. The structure is otherwise the same as that of DU. The bronze backing provides a high corrosion resistance, anti magnetic properties and a good thermal conductivity. DU Bush, Bearings, Washers etc applications is suitable for:--- • Rotating • Oscillating • Reciprocating & • sliding movements mainly for Automotive: Tractors, Combines, Crop Sprayers, Earth-Movers, Graders And Other Construction, Auto Machines, Specific Uses In Power  Steering Cylinders, Steering Gear Thrust Washers, Disc Brakes, Calipers And Pistons, Shock Absorbers, Governor Linkage, Windshield  Wiper Motor, Tilt Gear Assemblies, struts, shock absorbers guide bushing, hydraulic cylinders, gear pumps and motors and axial and radial piston pumps and motors. It is designed for use mainly under lubricated lubrications and shows excellent wear resistance, low static and dynamic friction coefficient. Business Machines: Photocopy Machines, Typewriters, Mail Sorters, Postage Meter Systems, Computer Terminal Printers And Peripheral  Equipment, Automatic Printing Devices, Mail Processing Machinery... Hydraulics And Valves: Pumps Including Gear, Rotary, Water, Axial Piston, And Other Types, Ball, Butterfly, Poppet Steam, And Other  Valves And Valve Trunnions, various kinds of medium, high-pressure gear pump, ram pump, vane pumps plunger pumps  Home Appliances: Tape Recorders, Refrigerators, Air Conditioners, Cleaners, Polishers, Sewing Machines, Ovens, Dishwashers, Clothes  Washing Machines... And Materials Handling, Marine Engine, Packaging, Textile Equipment, Tools... Characteristics, Advantages & Frictional Properties--- Non-Standard Components Non-standard components are not available from stock.  These products are manufactured to customers' requirements with or without our recommendations, and include for example : • Modified Standard Components - Flange & Plain Bushings, flange  & Thrust washers) • Half Bearings • Flat Components • Deep Drawn Parts • Pressing DX Type Bushings & Washers Dx Type Dry Bushings  (Marginal lubricated) It is made of high quality low-carbon steel, sintered porous bronze as its interlayer, with the compound of POM (POM-Pb) as its surface. And has good load capacity & wear-resistant. It's used in vehicle chassis, forming machine tools, steel metallurgical machinery, mineral mountain machinery, hydraulic industry and rolling steel industry, etc. It is without lead, can meet the requirements  of environment protection. All our Bushings are sold under our   Brand Our DX type bushings & washers are especially well-suited for applications where lubricant can not be supplied continuously or  repeatedly. Recommended for applications involving intermittent operation or boundary lubrication...  1. POM with lead 0.3~0.5mm & Without Lead 2. Porous bronze 0.2~0.3 mm 3. Steel backing 0.4~2.2 mm 4. Tin-plating        0.005 mm or copper plating 0.008mm Standard Cylindrical & Flanged Bush, Thrust & Flanged Washers OR Download our catalog from here DX Bush, Bearings, Washers etc applications is suitable for: • Rotating • Oscillating • Reciprocating & • sliding movements mainly for Automotive: Tractors, Combines, Crop Sprayers, Earth-Movers, Graders And Other Construction, Auto Machines, Specific Uses In Power  Steering Cylinders, Steering Gear Thrust Washers, Disc Brakes, Calipers And Pistons, Shock Absorbers, Governor Linkage, Windshield  Wiper Motor, Tilt Gear Assemblies, struts, shock absorbers guide bushing, hydraulic cylinders, gear pumps and motors and axial and radial piston pumps and motors. It is designed for use mainly under lubricated lubrications and shows excellent wear resistance, low static and dynamic friction coefficient. Machine Tool Building Industry: spindles in drill, grinding, and milling machines, ram guide plates in multi ram presses... Agricultural Equipment: gearbox, clutch, bale trips and wheel caster swivels for bale accumulators, front axle pivot bearings, steering  idler box bearings and kingpin bearings for harvesters... And Materials Handling, Marine Engine, Packaging, Textile Equipment, Hydraulics And Valves, Business Machines, Tools... Characteristics, Advantages & Frictional Properties--- Foreign made DS Type bush may be operated without lubricant or under a trace of oil. It is of low friction, anticorrosion and is of long  life. This is now applied in machines under oscillating motion and in open field or in corrosive environment such as hoisters,  bulldogger, tower cranes, and printing or dyeing machines for textiles.   Aluminum Bronze Bushes https://www.devengineparts.com/aluminum-bronze-bushes.htm https://www.devengineparts.com/aluminum-bronze-bushes.htm Thu, 03 Mar 2022 00:00:00 +0530 We are offering Aluminium Bronze Bushes to our client. These alloys are tarnish-resistant and show low rates of corrosion in atmospheric conditions, low oxidation rates at high temperatures, and low reactivity with sulfurous compounds and other exhaust products of combustion. They are also resistant to corrosion in sea water. Our core activity is Manufacturing “Centrifugal Castings” along with precision machining with the in-house machining facilities supplying both in Proof Machined and Machined Status. As we know that Centrifugal Castings are preferred over conventional castings due to its inherent qualities interms of near zero defects leading to higher reliability & strength.Our Manufacturing Capabilities are : CNC, VMC 4+1 AXIS, MILLING, GRINDERS, DRILLS, Heavy Duty Lathe Machines for Machining Induction Furnace for Melting Centrifugal Casting Machine types in Cantilever, Horizontal and Vertical Production Capacity from 0.100.Kg to 8000.Kg. (OD 30mm to 150mm) (Length 10mm to 300mm)  Our Quality Norms are : Standard Ingots are used for manufacturing castings from reputed companies. Results of Chemical & Physical Properties matching to your specifications. Our products are acknowledged for their : High tensile strength Better operational life Safe and reliable to use Dimensional accuracy Immaculate performance Capable of withstanding extreme pressure Application industry : Chemical Marine Petroleum Oil Compressor Parts https://www.devengineparts.com/compressor-parts.htm https://www.devengineparts.com/compressor-parts.htm Wed, 05 Jan 2022 00:00:00 +0530 Turbine Parts https://www.devengineparts.com/turbine-parts.htm https://www.devengineparts.com/turbine-parts.htm Wed, 05 Jan 2022 00:00:00 +0530 Turbine Thrust Bearing https://www.devengineparts.com/turbine-thrust-bearing.htm https://www.devengineparts.com/turbine-thrust-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 We are offering a Brand New Pair of Shinko Turbine Pump Thrust Bearing Set of Top Half and Bottom Half Pc.   These are Babbitt Based Bearings are made from high quality Material as per OE JIS WJ2 S25C. Pumps & Homogenizer Parts https://www.devengineparts.com/pumps-homogenizer-parts.htm https://www.devengineparts.com/pumps-homogenizer-parts.htm Wed, 05 Jan 2022 00:00:00 +0530 Pumps Bushing https://www.devengineparts.com/pumps-bushing.htm https://www.devengineparts.com/pumps-bushing.htm Thu, 03 Mar 2022 00:00:00 +0530 Pumps Rings https://www.devengineparts.com/pumps-rings.htm https://www.devengineparts.com/pumps-rings.htm Thu, 03 Mar 2022 00:00:00 +0530 Elliott Babbitt Bearing https://www.devengineparts.com/elliott-babbitt-bearing.htm https://www.devengineparts.com/elliott-babbitt-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 A new Split Type Shell Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of New Elliott Group Steam Turbines. Bearing Liner Top   412169-1 Bearing Liner Bottom 412169-2   ELLIOTT Babbitt Bearing 4121692 4121691. A Brand New Pair of Elliott Steam Turbine Bearing Set of Top Half and Bottom Half Pc. These are Babbitt Bearings as per OE Design. Elliott Trimetal Bearing https://www.devengineparts.com/elliott-trimetal-bearing.htm https://www.devengineparts.com/elliott-trimetal-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more.   A new Split Type Shell Bearing Liner Top and Bottom Pc a Bearing Liner Top   412169-1 Bearing Liner Bottom 412169-2   Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets.   ELLIOTT Trimetal Bearing 4121692 4121691. New Pair of Elliott Steam Turbine Bearing Set. Set of Top Half & Bottom Half Pc. Replacement Spare Parts Of New Elliott Group Steam Turbines. Though we can supply Elliott Stem Turbine Bearings in Babbitt alloy also in case needed. Elliott Turbine Bearing https://www.devengineparts.com/elliott-turbine-bearing.htm https://www.devengineparts.com/elliott-turbine-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.   A new Split Type Liner Bearing Metal Shell Lower and upper Half a Replacement Spare Parts for Turbines. Bearing Liner Bottom 412223-3 and Bearing Liner Top 412223-2   Description A Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc. Bearing is Made from high quality Babbitt Material We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed. Babbitt Metal Bush https://www.devengineparts.com/babbitt-metal-bush.htm https://www.devengineparts.com/babbitt-metal-bush.htm Thu, 03 Mar 2022 00:00:00 +0530 We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Railways (Locomotives), Compressors, Turbines, High Pressure Pumps, homogenizer, other rotating & reciprocating machinery. We manufacture these bushings Through Centrifugal Casting which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity.   We manufacture Bushings From Following Material – STEEL Back – SAE 1008 or SAE 1010 Linning Alloy – SAE12, SAE14, SAE15, GR84, GR90 These Bushings are widely used in Leaf Spring Eye / Shackle Bushings, Connecting Rod Small End Bush, Piston Pin Bushings, Valve Rocker Bushings, Piston Pin Bushings application.   Steel Backed Lead base Babbitt Alloy References: SAE 15, CLEVITE F23, FEDERAL MOGUL L 200, GLYCO 24   Steel backed Tin base Babbitt Alloy References: SAE 12, CLEVITE F1, FEDERAL MOGUL B 100, GLYCO 38 Bi-Metal Bushings (CL) https://www.devengineparts.com/bi-metal-bushings-cl.htm https://www.devengineparts.com/bi-metal-bushings-cl.htm Thu, 03 Mar 2022 00:00:00 +0530 We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Automobiles (Cars, Trucks, Tractors) Diesel Engines, Marine Engines, Railways (Locomotives), Earth Movers, Compressors, Generators other rotating & reciprocating machinery. We manufacture these bushings Through sintering or Centrifugal Casting which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity in some of the Products.   We manufacture Bushings From Following Material – STEEL Back – SAE 1008 or SAE 1010 Linning Alloy – SAE 792, SAE 797, SAE 793, SAE 794, SAE 799, SAE 64   These Bushings are widely used in Leaf Spring Eye / Shackle Bushings, Connecting Rod Small End Bush, Piston Pin Bushings, Valve Rocker Bushings, Piston Pin Bushings application.   Steel backed Leaded Bronze Alloy References: DIN CuPb10Sn, SAE797, JIS-LBC3, UNS C93700, Clevite F100, Daldo L10, D.A.B.D57, federal Mogul / Talho HF2, Glacler GGB SY, Glyco66, Miba2·1010, Kart Schmidt Ds94OS, ACL F100,SAE792, CuPb24Sn4, SAE799, RS-LBC6, DAIDO L23,JIS-LBC6, GLYCO-68, ACL-F250, SAE794 Tri Metallic Bush https://www.devengineparts.com/tri-metallic-bush.htm https://www.devengineparts.com/tri-metallic-bush.htm Thu, 03 Mar 2022 00:00:00 +0530 TriMetal engine Bearings & Bushings have been the industry standard since the first patent on the cast, copper, lead composition decades ago. We manufacture & Export Plain, Thinwalled, Cut Type as well as Flange bushings in various metals & composition. We manufacture bushings for Railways (Locomotives), Compressors, Turbines, High Pressure Pumps, homogenizer, other rotating & reciprocating machinery. We manufacture these bushings Through Centrifugal Casting which enables us to manufacture Bushings in Large (Bulk) quantity as well as in small quantity.   Seizure Resistance – TriMetal Bearings & Bushings have as much as 20-40% better seizure resistance than competitors’ engine bearings.   Load Capacity – TriMetal Bearings & Bushings can withstand over 40-60% higher loads for extended periods compared to competitor bearings.   Embedability & Conformability – The overlay on a TriMetal™ bearing offers a superior surface for forgiveness, offering additional protection that can be extremely beneficial in an engine that is poorly maintained.   Durability – TriMetal Bearings & Bushings not only exceed light vehicle OE durability requirements, they also exceed heavy vehicle OE durability requirements.   Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted white metal/Lead for slipperiness, conformability and embedability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Bearings & Bushings by 10-20 % or more.   TIN Based Babbitt OVER LAY (WHITE METAL) Tin based overlays contain copper (8-12%) as a hardening component. The alloys are developed to replace toxic lead based overlays. Tin based overlays possess excellent corrosion resistance and cavitation resistance. Overlay multilayer system of Sn alloy deposited on the bi-layer the overlay thickness due to varying content of copper (soft top layer and hard bottom layer of the overlay). Such multilayer Bearings & Bushings are capable to withstand alternating loads up to 11600-13000 psi (80-90 MPa). Hardness of tin-copper overlays is 20-30 HV. Sabroe SMC 100 Big End Bearing https://www.devengineparts.com/sabroe-smc-100-big-end-bearing.htm https://www.devengineparts.com/sabroe-smc-100-big-end-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A quality Con Rod Bearings for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. A quality aftermarket Half section Shell Bearings Fits SMC T, SMC S, SMC L, and SMC E Compressor Bore of 100 mm. Please order 1 Pair for each cylinder for Sabroe 100 Refrigeration compressor. Big End Bearings Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The Bearing is part of Connecting rod assembly complete – Pt No – 3123-004 and 3123-006 a Part for Service Kit 3188-090. Sabroe SMC 100 Main Bearing Bush https://www.devengineparts.com/sabroe-smc-100-main-bearing-bush.htm https://www.devengineparts.com/sabroe-smc-100-main-bearing-bush.htm Thu, 03 Mar 2022 00:00:00 +0530 Sabroe SMC 100 Main Bearing Bush Pt No 2132.021 A quality aftermarket Main Bearings Bushing for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. Each order will contain 1 Pc of Main Bearing bush PN 2132.021 a Set of 2 Main Flange Bushings will be required in a complete set. A Part of Complete assembly Part No 3188.134.   Set of 2 PC  Part No 2132-021 A quality Main Flange Bushings made from a quality SAE12 Babbitt Grade for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. Please order 2 Pc Bushings for a Complete Set for Sabroe 100 Refrigeration compressor. Main Bearing Bush fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The Bearing is part of Service kit main bearings complete. A Part for Service Kit Part No 3188.134 and Pt No  3188.135 Sabroe SMC 100 Piston Pin https://www.devengineparts.com/sabroe-smc-100-piston-pin.htm https://www.devengineparts.com/sabroe-smc-100-piston-pin.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A quality gudgeon pin for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. Piston Pin Bush or Rod Small End Bush Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The Bushing is part of Connecting rod assembly complete – Pt No – 3123-004 and 3123-006 a Part for Service Kit 3188-089 & 3123.084  SMC100 Bearing PN 2133-003 is part of Con rod assy PN 3123-004 & 3123-006 a Part for Service Kit 3188-090 Sabroe SMC 100 Piston Pin Bushing https://www.devengineparts.com/sabroe-smc-100-piston-pin-bushing.htm https://www.devengineparts.com/sabroe-smc-100-piston-pin-bushing.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A quality Bronze Con Rod Bush for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. Piston Pin Bush or Rod Small End Bush Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The Bushing is part of Connecting rod assembly complete – Pt No – 3123-004 and 3123-006 a Part for Service Kit 3188-089 & 3123.084  SMC100 Bearing PN 2133-003 is part of Con rod assy PN 3123-004 & 3123-006 a Part for Service Kit 3188-090. Sabroe SMC 100 Piston Rings https://www.devengineparts.com/sabroe-smc-100-piston-rings.htm https://www.devengineparts.com/sabroe-smc-100-piston-rings.htm Thu, 03 Mar 2022 00:00:00 +0530 Set of 2+1 Standard Bore 100mm PN 3125.130 and 3125.065 : Piston Rings Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The piston ring is part of Piston with pin and rings assembly Part No 3124.002, 3124.052, 3124.052 Sabroe SMC 100 RT Pump Journal Bearing Bush Set https://www.devengineparts.com/sabroe-smc-100-rt-pump-journal-bearing-bush-set.htm https://www.devengineparts.com/sabroe-smc-100-rt-pump-journal-bearing-bush-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Oil Pump Bushing Set for Sabroe SMC 100 T/S/L/E Compressor A quality Bronze Con Rod Bush for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm. Oil Pump Bush set of 15mm and 20mm Length of 2 Pc each Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 – 106 – 108 Mk4 Sabroe 100 T/S/L/E Compressor. The Bushing is a Part of 3141.187 Complete RT pump. A quality aftermarket Bronze Journal bearing RT Pump Bushing Fits SMC T, SMC S, SMC L and SMC E Compressor Bore of 100 mm. Bukh Engine DV10 Main Bearing Bush https://www.devengineparts.com/bukh-engine-dv10-main-bearing-bush.htm https://www.devengineparts.com/bukh-engine-dv10-main-bearing-bush.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides Main Bearings Set We can also supply following Parts : Connecting rod bearing shells, - 40563 / 000E0563 (Standard / Under Size) DV20, DV24, DV29, DV32, DV36 and DV48 Big End Bearings / Plejlstangspander, sæt / Pleuellager, Satz Main bearing liner - 000E 4765 / 000E4765 (Standard / Under Size) DV36 and DV48 Hovedlejeforing, standard Hauptlager, Laufbuchse A high quality replacement Bimetal bearings for Bukh DV10 DV20, DV24, DV29 and DV32 2 CYL MARINE DIESEL ENGINE. Main Bearings liners Set for DV10 Single Cylinder Engine. Main Bearing Liner Rear Bush Part No – DEV 00D0454 or DEV 40454 and Front Bush Part No – DEV 00D0453 or DEV 40453 – 1 No Each Bore x stroke  3.35″ x 3.35 in (85 x 85 mm) Engine Valve Guide Seat https://www.devengineparts.com/engine-valve-guide-seat.htm https://www.devengineparts.com/engine-valve-guide-seat.htm Thu, 03 Mar 2022 00:00:00 +0530 We are one of the eminent valve guide manufacturers and suppliers in India, who manufacture and supply a wide range of valve guide. The valve guide offered by us is manufactured from optimum quality raw material, so as to ensure the quality & durability of the final product. We provide comprehensive range of quality engine valve guide, which can be used in different engines. We manufacture and supply a wide range of valve guides widely used for automobiles, tractors, industrial & diesel engines. We manufacture valve guide in various material depend on :- Customer requirement Type & Size of engine Engine R.P.M. & effort of engine   Their application where usedMaterial of Valve Guide as we use :- Copper zinc alloy Phosphorous Bronze and leaded bronze Manganese Bronze Aluminium Bronze (North American UNS C95400, German CuAI10Fe, British AB1) for high temperature applications. Gun Metal Alloy Graded Cast Iron of 25 & 30 Grade. This Cast Iron is specially made for High Racing Engine. Tin Bronze (North American UNS C90500, German CuSn10Zn, British G1) for piston airplane enginesCast Iron is a general term applied to a wide range of iron carbon alloys. Their carbon content is such as to cause some liquid of eutectic composition to solidify. The maximum carbon content is therefore about 2% while the practical maximum is about 4.3%Cast Iron should not be thought of as metal having single element. It should at least posses’ six elements. These are iron, carbon, silicon, manganese, phosphorus and sulphur.   Some of the important mechanical properties Brinell Hardness Number (b.h.n) = 150 to 225 It is a brittle material. It cannot be beaten in sheets or rolled or forged. Hence it is not a malleable material   Various types of Cast Iron are as follows: Grey Cast Iron White Cast Iron Mottled Cast Iron Malleable Cast Iron Spheroidal Grey Iron (s.g.iron) Inoculated Cast Iron Alloy Cast Iron   Addition of nickel to cast iron produces fine grains, helps formation of graphite and prevents formation of white hard iron nickel & copper ensure an austenitic structure. Chromium and silicon add resistance to scaling. The microstructure of iron is stabilized and formation of fine graphite is promoted by the addition of chromium. The matrix of cast iron is strengthened through promotion of the fine pearlite by the addition of molybdenum.   Valves developed from CuZnAl-alloy & grey cast iron alloy with high phosphorous content to offer high wear resistance as well as improver the years working properties in poor lubrication conditions. The inner bore of these valve guides is finished to perfect size, not usually done by competitors.   CuZnAl-alloy Guides are with excellent wear resistance and low coefficient of friction. Used for highest stressed guides. While developing these valve guides, we pay care full attention to the accurate dimensions, so that they could meet with the OEM standards.   Our valve guide has hardness in range of 160 225 BHN. ValveGuide has microstructure of matrix pearlite with 5% free ferrite. We also provide thread or spiral in inner diameter of valve guide to retain oil for long time between valve and valve guide & increase life both. Our valve guide are grounded to a surface finish 0.80 micro ra value on its outer dia & maintain outer diameter within tolerance of 12 microns. Our valve guide has Super Finish Bore. Bukh Engine DV20 DV10 Valves https://www.devengineparts.com/bukh-engine-dv20-dv10-valves.htm https://www.devengineparts.com/bukh-engine-dv20-dv10-valves.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679,   Bukh DV20 DV10 Valves for Marine Engine 000E9113 Inlet and 000E9114 Exhaust Valve. A high quality replacement Valve Pair for Bukh DV 2 Cylinder and 1 Cylinder Marin diesel Engine. Engine Valves Pair is suitable for Bukh with Bore X Stroke – 3.35″ x 3.35 in (85 x 85 mm) Bukh Engine DV24 DV36 DV48 Valve Guide https://www.devengineparts.com/bukh-engine-dv24-dv36-dv48-valve-guide.htm https://www.devengineparts.com/bukh-engine-dv24-dv36-dv48-valve-guide.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679,  Bukh DV24 DV36 DV48 Valve Guides. Bukh engine Inlet Exhaust Valve  Guide Part No 000E4878 pair for Bukh DV24 DV36 DV48. A high quality replacement Valve Pair for Bukh DV 2 Cylinder and 3 Cylinder Engine. Inlet and Exhaust Engine Valve Guide Pair is suitable for Bukh marine Diesel Engine. Bukh DV24, DV24 RME, DV29, DV29 RME, DV32, DV32 RME, DV36, DV36 RME, DV48 and DV48 RME Valve guide. Piston Rings https://www.devengineparts.com/piston-rings.htm https://www.devengineparts.com/piston-rings.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Hatz E108 Z108 D108 V108 Piston Ring Set https://www.devengineparts.com/hatz-e108-z108-d108-v108-piston-ring-set.htm https://www.devengineparts.com/hatz-e108-z108-d108-v108-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: HATZ 108 Series Diesel Motor Engine Part Number DEV 08-143500-00. A High quality Piston Ring Set for Hatz Diesel Engine Standard Bore 108mm. Hatz E108 Z108 D108 V108 Piston Ring Set of 3 x 3 x 3 x 5 MM (4 PC) Iveco Fiat Series Engine Piston Ring https://www.devengineparts.com/iveco-fiat-series-engine-piston-ring.htm https://www.devengineparts.com/iveco-fiat-series-engine-piston-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A quality aftermarket Piston Ring Set suitable for IVECO FIAT Series engine.. 1 Piston Ring Set Comprising DEV 8094845 Each order will contain 1 Set of Piston Rings (3.5 + 2.5 + 4.00)  Mack E6 Piston Ring https://www.devengineparts.com/mack-e6-piston-ring.htm https://www.devengineparts.com/mack-e6-piston-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 Mack E6 Piston Ring Set Part No  DEV 353GC2139 with Bore 123.82mm : Suitable for Trucks, Heavy Commercial Vehicles or HCV etc Can be used with EPA-8074, EPA-8075 and EPA-8076 6 sets will be require for 6 Cylinder Mack E6 Engine   A quality aftermarket Piston Ring Set suitable for Mack E6 Series engine.. Each order will contain 1 Set of Piston Rings (3.17 + 3.17 + 3.17 + 4.72) (2) 1/8″ Keystone Plasma (1) 1/8″ Keystone Chrome, Tapered Face (1) 3/16″ Oil, Wide Rail Mack E7 Piston Ring https://www.devengineparts.com/mack-e7-piston-ring.htm https://www.devengineparts.com/mack-e7-piston-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 Mack E7 Piston Ring Set Part No  DEV 353GC214 with Bore 123.82mm : Suitable for Trucks, Heavy Commercial Vehicles or HCV etc 6 sets will be require for 6 Cylinder Mack E7 Engine   A quality aftermarket Piston Ring Set suitable for Mack E7 Series engine.. 1 PISTON RING SET Comprising DEV 353GC2142  Each order will contain 1 Set of Piston Rings (3.17 + 2.37 + 4.72) (1) Keystone Plasma – 3.17mm or 0.125″ (1) Keystone Chrome, Tapered Face 2.37mm or 0.093″ (1) 3/16 Oil, Wide Rail – 3.17mm or 0.1875″ Man D0824 D0826 Piston Ring https://www.devengineparts.com/man-d0824-d0826-piston-ring.htm https://www.devengineparts.com/man-d0824-d0826-piston-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 MAN D0824 D0826 Piston Rings with standard bore 108mm. A quality aftermarket Piston Ring Set suitable for MAN D0824 D0836 Series Truck Engines. Each order will contain 1 Set of 3 Rings (3 + 2.5 + 4) 1. 3mm – Keystone type compression ring Chromed. 2. 2.5mm – Tapered Ring – Phosphated 3. 4mm – Bevel oil control ring – Chromed Phosphated From the year of construction 2003 pistons with rings were 108 x 3.00 x 2.50 x 3.00 mm. installed Vehicle: truck-Series 635 / 735 / 650 / 850 are fitted with different 4 Ring Set (108 x 2.5 x 2.5 x 2.5 x 5) Meadows 4DC-330 Piston Ring Set https://www.devengineparts.com/meadows-4dc-330-piston-ring-set.htm https://www.devengineparts.com/meadows-4dc-330-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: 1 Set of 2+2+1 Piston Ring for Meadows 4DC330. Please order 4 Sets to make a complete Set for a 4 Cylinder Engine Meadows 4DC-330 Piston Ring set 120mm. A quality piston ring set for use in Meadows 4DC-330 Series engines with standard bore of 120 mm or 4.724″. Diesel 4-cylinder liquid-cooled tread Tractor Diesel Engine Bore 120mm, Stroke 120mm, 4.724 x 4.724 inches 331 cu. in. - 5.43 litres capacity  Engine Bearings https://www.devengineparts.com/engine-bearings.htm https://www.devengineparts.com/engine-bearings.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Kubota V1505 D1005 D1105 Big End Bearing https://www.devengineparts.com/kubota-v1505-d1005-d1105-big-end-bearing.htm https://www.devengineparts.com/kubota-v1505-d1005-d1105-big-end-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 These Bearings are used in following Engines and Models Kubota Engine or Tractor Models - V1505-E4B, D1105-E4B, D1105-E4B, V1305-E4B, D1305, D905, B1700, B1710, B2100, B2110, B2400, B2410, B2710 L1-26, L1-28, L1-285, L1-265, L1-295, L1-315, Z650, Z850, Z750, D1100, D1101, D1102, V1500, V1501, V1502, Z851, D1402, D1302, DH1101, D1301, V1702, V1902   Description: Kubota V1505 D1005 D1105 Big End Bearing We can also supply Dev 16241-2231 We offer new set of big end (connecting rod) bearing shells for the Kubota type of diesel engine. Kubota High quality CL Bimetal (Copper Lead  Alloy) big end bearing in export worthy packaging. Kubota V1505 D1005 D1105 Connecting Rod Bearing Pt No Dev 16241-22310 These are Std. bearings for 40 mm Shaft Dia. Bukh Engine DV20 DV10 Big End Bearing https://www.devengineparts.com/bukh-engine-dv20-dv10-big-end-bearing.htm https://www.devengineparts.com/bukh-engine-dv20-dv10-big-end-bearing.htm Thu, 03 Mar 2022 00:00:00 +0530 The offer is of 1 Pair of Big End Bearing. In case you have 1 Cylinder Engine (DV10) - You will need - 1 Pair 2 Cylinder Engine ( DV20 DV24 DV29 ) - You will need - 2 Pairs 3 Cylinder Engine (DV32 DV36 DV48) - You will need - 3 Pairs   Description: Number of cylinders  1, 2 and 3 Cyl Bore x stroke  3.35″ x 3.35 in (85 x 85 mm) Bukh DV20 DV10 Big End Bearing PN 000E0563 Big End bearings are suitable for Bukh DV20 DV24 DV29 DV32 DV36 DV10 DV48 D10 Engines Connecting rod bearing shells Standard Size Part Number 40563 or Pt. No.000E0563 Big End Bearings / Plejlstangspander, sæt / Pleuellager, Satz Engine Gaskets https://www.devengineparts.com/engine-gaskets.htm https://www.devengineparts.com/engine-gaskets.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Bukh DV20 DV10 Exhaust Gasket https://www.devengineparts.com/bukh-dv20-dv10-exhaust-gasket.htm https://www.devengineparts.com/bukh-dv20-dv10-exhaust-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Description Bukh DV20 DV10 Exhaust Gasket 000D9881 A high quality head to manifold Gasket for Bukh Marine Diesel Engine old Pt No DEV 39881 Bukh Engine DV20 DV10 Piston Ring Set https://www.devengineparts.com/bukh-engine-dv20-dv10-piston-ring-set.htm https://www.devengineparts.com/bukh-engine-dv20-dv10-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Bukh DV20 DV10 Piston Ring Set Part No DEV 030D0301 for Marine Diesel Engine. A high quality replacement ring set is a Part for Piston Assembly Part No DEV 008E7317 A Single Cylinder Bukh D10 & DV10 will require 1 Set. A twin Cylinder DV20 Marine Diesel Engine will require 2 Set to make a complete set to run the engine. For Piston Assembly Part No DEV 008E7317 Please check out our other listing. Bukh DV20 DV8 10LW DV10 Elbow Gasket https://www.devengineparts.com/bukh-dv20-dv8-10lw-dv10-elbow-gasket.htm https://www.devengineparts.com/bukh-dv20-dv8-10lw-dv10-elbow-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Exhaust Flange Gasket Part No – DEV 000D9762  and Old  Part No – DEV 39762. A high quality Bend Elbow Gasket suitable for Bukh DV8, 10 LW, DV10, DV20, DV24 and DV32 Marine Diesel Engine.   Bukh Engine DV20 Head Gasket-M https://www.devengineparts.com/bukh-engine-dv20-head-gasket-m.htm https://www.devengineparts.com/bukh-engine-dv20-head-gasket-m.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679,   Bukh DV20 Engine Cylinder head gasket – DEV 000E7766 – 1 Pc With Fire Ring or Metal Ring (Old Part No – DEV 000D9687) Toppakning / Zylinderkopfdichtung. Bore x stroke 3.35″ x 3.35 in (85 x 85 mm) Bukh Engine DV24 DV29 DV32 Front Cover Gasket https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-front-cover-gasket.htm https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-front-cover-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679,   A high quality Front Cover Gasket or screen end cover Gasket suitable for DV24 DV29 and DV32 2 CYL MARINE DIESEL ENGINE. 1 Pc  Gasket suitable for 2 cylinder Engine Bore of 85mm made from Quality Material. Front Cover Gasket for Bukh DV24 DV29 DV32 Part No DEV 000E0975  –   1 Pc Also called Gasket screen end cover Bore x stroke 3.35″ x 3.35 in (85 x 85 mm) Bukh Engine DV24 DV29 DV32 Manifold Gasket https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-manifold-gasket.htm https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-manifold-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A high quality Bukh Manifold Gasket 000D9881 Bukh Exhaust Manifold Gasket Part No DEV 000D9881 or Pt No – DEV 39881 Suitable for Bukh DV8, 10 LW, DV10, DV20, DV24 and DV32 Engine. Bukh Gasket Head to Manifold PT No 000D9881 Or 39881   Bukh Engine DV24 DV29 DV32 Sump Gasket https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-sump-gasket.htm https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-sump-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Cylinder Head Gasket https://www.devengineparts.com/cylinder-head-gasket.htm https://www.devengineparts.com/cylinder-head-gasket.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides above spares we can also supply other spares for Lister CS Engines 9/1 & JP Engines like  Piston, Piston Rings, Cylinder Liner and Bearings Lister 9/1 JP Cylinder Head Gasket. Part number  Dev 8-1/C105  or  10-3-105. For Lister 9/1 JP JP2 JP3 JP4 & JP6 all single & Multi cylinder models with bore of 4.5″ or 114.30. Cylinder Liners https://www.devengineparts.com/cylinder-liners.htm https://www.devengineparts.com/cylinder-liners.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Bukh Engine Cylinder Liner O-Ring https://www.devengineparts.com/bukh-engine-cylinder-liner-o-ring.htm https://www.devengineparts.com/bukh-engine-cylinder-liner-o-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A high OE quality Cylinder Liner Rubber O-Ring for Bukh Marine Diesel Engine suitable for Bukh DV10, DV20, DV24 and DV32 ENGINE. This O-Ring are Custom made as per OE Standard and design o withstand Temperature up to 150 Degree Celsius Bukh Marine diesel Engine Cylinder Liners O-ring or Rubber Ring Part No DEV 560M1091 Or Pt No DEV 39762. Oring fits Bukh DV10, DV20, DV24, DV29 & DV32 RM & RME Engines. A 1 Cylinder Engine Will Need 1 Set and a 2 Cylinder Engine Will Need 2 Sets to make the complete set. The O-ring fits Cylinder Liner PN DEV 41561 or DEV 000E1561 for Bukh DV20 DV24 DV10 MARINE DIESEL Engine. Bukh Engine DV20 DV10 Cylinder Liner https://www.devengineparts.com/bukh-engine-dv20-dv10-cylinder-liner.htm https://www.devengineparts.com/bukh-engine-dv20-dv10-cylinder-liner.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Cylinder Liner for Bukh DV10 DV20 DV24, DV24 ME, DV24 RME, DV29, DV29 ME, DV29 RME, DV32, DV32 ME, DV32 RME. A high quality replacement Parts for Marine diesel Engine. Cylinder Liner / Cylinderforing / Zylinderlaufbuchse Part No DEV 41561 Or Pt No DEV 000E1561  – 1 Pc O-Ring PN DEV 560F0011  – 2 Pc We Are also offering separately Piston, ring, pin and Cerclip sets Bukh DV20 DV10 Cylinder Liner https://www.devengineparts.com/bukh-dv20-dv10-cylinder-liner.htm https://www.devengineparts.com/bukh-dv20-dv10-cylinder-liner.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Cylinder Liner for Bukh DV10 DV20 DV24, DV24 ME, DV24 RME, DV29, DV29 ME, DV29 RME, DV32, DV32 ME, DV32 RME A high quality replacement Parts for Marine diesel Engine Cylinder Liner / Cylinderforing / Zylinderlaufbuchse Part No DEV 41561 Or Pt No DEV 000E1561  – 1 Pc O-Ring PN DEV 560F0011  – 2 Pc We Are also offering separately Piston, ring, pin and Cerclip sets Bukh DV24 DV29 DV32 Cylinder liner https://www.devengineparts.com/bukh-dv24-dv29-dv32-cylinder-liner.htm https://www.devengineparts.com/bukh-dv24-dv29-dv32-cylinder-liner.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Cylinder Liner or  Cylinderforing or Zylinderlaufbuchse Part No DEV 41561 Or DEV 000E1561. A high quality replacement Cylinder Liner for Bukh DV10 DV20 DV24, DV24 ME, DV24 RME, DV29, DV29 ME, DV29 RME, DV32, DV32 ME, DV32 RME. We Are also offering separately Piston, ring, pin and Cerclip sets. Bukh DV36 DV48 Cylinder Liner 000E4788 https://www.devengineparts.com/bukh-dv36-dv48-cylinder-liner-000e4788.htm https://www.devengineparts.com/bukh-dv36-dv48-cylinder-liner-000e4788.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides These We can also supply following Parts : Connecting rod bearing shells, - 40563 / 000E 0563(Standard / Under Size) DV20 / DV36 Big End Bearings / Plejlstangspander, sæt / Pleuellager, Satz Main bearing liner - 000E 4765 / 000E4765(Standard / Under Size)DV36 Hovedlejeforing, standard  Hauptlager, Laufbuchse DV20 Cylinder head gasket - DEV 000E7766 -  1 Pc (Old Part No - DEV 000D9687)   Description: Bukh DV36 DV48 Cylinder Liner Part No 000E4788. A high quality replacement Cylinder Liner for Bukh DV36 RME and DV48 ME 3 cylinder Marine diesel Engine. A 3 Cylinder Engine will required 3 Sets to be ordered, so as to make a complete set. Lister 9/1 & JP Cylinder Liner https://www.devengineparts.com/lister-9-1-jp-cylinder-liner.htm https://www.devengineparts.com/lister-9-1-jp-cylinder-liner.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: We Are also offering Piston, ring, pin and Cerclip set. Piston P/n 573-10430 and Ring set Pt. No 574-10980 Please buy it separately so that whole assembly is complete We are offering Lister 9/1, JP, Cylinder Liner Part No – DEV 010-02247 and  O-Ring Set Pt No  DEV – 010-02-116. Lister 9/1 & JP Cylinder Liner with O-Ring Set. A standard cast iron Cylinder Liner for use in Lister 9/1 & JP Series engines, comes complete with O Ring Sets. For Lister 9/1 JP JP2 JP3 JP4 & JP6 standard Bore 4.5″ / 114.30mm. Lister 9/1 & JP Cylinder Liner Piston Assembly https://www.devengineparts.com/lister-9-1-jp-cylinder-liner-piston-assembly.htm https://www.devengineparts.com/lister-9-1-jp-cylinder-liner-piston-assembly.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: We are offering Lister 9/1, JP, Cylinder Liner Part No – DEV 010-02247 and  O-Ring Set Pt No  DEV – 010-02-116 along with PISTON Assembly Pt No 573-10430 A standard cast iron Cylinder Liner for use in Lister 9/1 & JP Series engines, comes complete with Piston Assembly Sets For Lister 9/1 JP JP2 JP3 JP4 & JP6 standard Bore 4.5″ / 114.30mm Cylinder Barrel Kit https://www.devengineparts.com/cylinder-barrel-kit.htm https://www.devengineparts.com/cylinder-barrel-kit.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Lister HR Cylinder Barrel Bare https://www.devengineparts.com/lister-hr-cylinder-barrel-bare.htm https://www.devengineparts.com/lister-hr-cylinder-barrel-bare.htm Thu, 03 Mar 2022 00:00:00 +0530 Order Piston Assy Separately to make a Cyl. Barrel Kit complete PISTON ASSEMBLY Comprising DEV - 572-50122 1  PISTON 2 PISTON RING SET Comprising  DEV - 572-50622 5 Ring Set 3  GUDGEON PIN 4 CIRCLIP  2 Pc 351-50090   LISTER Petter HR HRW HL Cylinder Block – DEV 353-80971 A Part of LISTER HR HRW HL Cylinder Barrel Piston KIT Graded cast iron Cylinder Block of standard Size Fits all Lister HR, HRW and HL Series engines Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder HL4, HL6, HLT6, HR2, HR3, HR4, HR6, HR2M, HR3M, HR4M, HR6M, HRW2, HRW3, HRW4, HRW6, HRW2M, HRW3M, HRW4M and HRW6M Lister HR Cylinder Barrel Kit https://www.devengineparts.com/lister-hr-cylinder-barrel-kit.htm https://www.devengineparts.com/lister-hr-cylinder-barrel-kit.htm Thu, 03 Mar 2022 00:00:00 +0530 LISTER Petter HR HRW HL Cylinder Block Part No DEV 353-80971  Includes Piston Kit Assembly consisting of Quality LM13 Piston.   Piston assembly Pt No DEV – 572-50122 Comprising Piston Piston Ring Set Comprising  DEV – 572-50622 GUDGEON Pin CIRCLIP  2 Pc 351-50090   Lister HR Cylinder Barrel Kit. Quality CI Cylinder Block Barrel  of standard size fits all Lister Petter HR, HRS, HL and HLT series engines, Lister Petter HR HRW HL HLT Cyl. Barrel  Part No DEV 353-80971 along with Piston assembly DEV – 572-50122. Used in HL4, HL6, HLT6, HR2, HR3, HR4, HR6, HR2M, HR3M, HR4M, HR6M, HRW2, HRW3, HRW4, HRW6, HRW2M, HRW3M, HRW4M and HRW6M Engines Lister LR Cylinder Barrel Piston Kit https://www.devengineparts.com/lister-lr-cylinder-barrel-piston-kit.htm https://www.devengineparts.com/lister-lr-cylinder-barrel-piston-kit.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: PISTON ASSEMBLY Comprising DEV - 570-11308 1  PISTON DEV - 544009 2 PISTON RING SET Comprising  DEV - 570-12120 3  GUDGEON PIN 4 CIRCLIP  2 Pc   80420 Our Cylinder Block / Barrel Piston KIT DEV 201-70110 LR Kit comes complete with Lister LR PISTON ASSEMBLY DEV – 570-11308 Lister LR Cylinder Barrel Piston KIT. Graded cast iron Cylinder Block with LM13 Alloy piston. Standard Bore 76.20mm or 3″ Fits all Lister Petter LR Series engines, Widely used as Stationary and Industrial engines of single or Twin Cylinder LR1 & LR2. Lister LR LR2 Cylinder Barrel Bare 201-70110 https://www.devengineparts.com/lister-lr-lr2-cylinder-barrel-bare-201-70110.htm https://www.devengineparts.com/lister-lr-lr2-cylinder-barrel-bare-201-70110.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: PISTON ASSEMBLY Comprising DEV - 570-11308 1  PISTON DEV - 544009 2 PISTON RING SET Comprising  DEV - 570-12120 3  GUDGEON PIN 4 CIRCLIP  2 Pc   80420 Please buy it separately. We are pleased to offer Graded cast iron Cylinder Block / Barrel of standard Size Fits all Lister Petter LR Series engines, Item does not include Lister LR PISTON ASSEMBLY DEV – 570-11308. Please buy it separately. Lister LR1 LR2 Cylinder Barrel or Block Bare DEV 201-70110 LR without piston kit. Widely used as Stationary and Industrial engines of single or Twin Cylinder LR1 & LR2. Lister LT Cylinder Barrel Bare https://www.devengineparts.com/lister-lt-cylinder-barrel-bare.htm https://www.devengineparts.com/lister-lt-cylinder-barrel-bare.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Lister LT series Single And multi cylinder are used as Stationary Engine, A Single Cylinder engine will need a single set a 2 cylinder Engine will need 2 Sets. A Replacement PISTON Set suitable for LISTER Petter LT1 & LT2 Engines. Set of Lister LT Cylinder Block / Barrel  DEV 601-30271 without piston assembly DEV 601-51145. Please buy Piston Assembly 601-51145 separately includes  Piston, Ring Set, Pin and circlip. We are pleased to offer Graded cast iron Cylinder Block / Barrel standard Size Fits all Lister Petter LT Series engines. Lister LT Cylinder Barrel Kit https://www.devengineparts.com/lister-lt-cylinder-barrel-kit.htm https://www.devengineparts.com/lister-lt-cylinder-barrel-kit.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Lister LT series Single And multi cylinder are used as Stationary Engine, A Single Cylinder engine will need a single set a 2 cylinder Engine will need 2 Sets. A Replacement PISTON Set suitable for LISTER Petter LT1 & LT2 Engines. Set of Lister LT Cylinder Block / Barrel Piston KIT DEV 601-30271 along with piston assembly DEV 601-51145. Lister LT Cylinder Barrel Kit. Graded cast iron Cylinder Block / Barrel. Along with LM Aluminum Alloy replacement piston of standard Size Fits all Lister Petter LT Series engines. Comes complete with Piston, Ring Set, a gudgeon pin and a pair of circlips. Please select the correct size for your engine. Suitable For LT & LT2 Engines Bore 82.55 / 3.25″. Lister SR Cylinder Barrel https://www.devengineparts.com/lister-sr-cylinder-barrel.htm https://www.devengineparts.com/lister-sr-cylinder-barrel.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: We are pleased to offer a quality cast new replacement Cylinder Bock. Please select the correct quantity for your engine. Piston Assembly Pt No DEV 570-10940 is not included in the offer. Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder SR1, SR2, SR3 and SR4 Air Cooled Engine. Lister SR Cylinder Barrel PN 201-50632. Cylinder Bock suitable for SR Engine standard Bore 88.90 mm or 3.500″ or  3 1/2 inch. Lister SR Cylinder Barrel Kit Set https://www.devengineparts.com/lister-sr-cylinder-barrel-kit-set.htm https://www.devengineparts.com/lister-sr-cylinder-barrel-kit-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Our Cylinder Block Kit OFFER & REFERENCE PART NUMBERS CYLINDER BARREL, BLOCKS: DEV 201-50632 1 Pc PISTON ASSEMBLY Comprising : DEV 570-10940 1 GUDGEON PIN : 1 Pc 2 PISTON : 1 Pc 3 PISTON RING SET Comprising : DEV 570-12140 1 Set 4 CIRCLIP : 2 Pc   Description: Lister SR Cylinder Barrel Kit Set. A quality cast cylinder fully machined Bore 88.90 mm or  3.500″ or 3 1/2 inch . Along with Graded LM13 Aluminum Alloy replacement piston Assembly. Comes complete with Ring Set, a gudgeon pin and a pair of circlips. Lister TR TL Cylinder Barrel Kit Set https://www.devengineparts.com/lister-tr-tl-cylinder-barrel-kit-set.htm https://www.devengineparts.com/lister-tr-tl-cylinder-barrel-kit-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder TR1, TR2, TR3, TL2, TL3. These will fit all TR engines, and TL engines from 1985 onwards, so from 3500064TL2 and 3500231TL3. TL engines prior to these numbers used a four ring piston; the three ring Piston set can be used on the engine. In case needed please contact us before ordering.We Are offering Free piston ring set along with it. so that whole assy. is complete     We are pleased to offer a new replacement Cylinder Bock Suitable For TR and TL Engine Bore 98.425 mm / 3.875″ / 3 7/8 . A quality cast cylinder supplied fully machined. Along with Graded LM13 Aluminum Alloy replacement piston of standard Size Fits all Lister Petter TR / TL Series engines, comes complete with Ring Set, a gudgeon pin and a pair of circlips. Please select the correct size for your engine.   Lister TR TL Cylinder Barrel Kit Set Ref PART NUMBERS CYLINDER BARREL, BLOCKS  DEV 570-35530  1 Pc PISTON ASSY. Comprising  DEV 570-33360 1 GUDGEON PIN –  1 Pc 2 PISTON –  1 Pc 3 PISTON RING SET Comprising –  DEV 570-33370 1 Set 4 CIRCLIP –  2 Pc Piston Ring Set https://www.devengineparts.com/piston-ring-set.htm https://www.devengineparts.com/piston-ring-set.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Piston Assembly https://www.devengineparts.com/piston-assembly.htm https://www.devengineparts.com/piston-assembly.htm Engine Parts Thu, 03 Mar 2022 00:00:00 +0530 Engine Piston Assembly https://www.devengineparts.com/engine-piston-assembly.htm https://www.devengineparts.com/engine-piston-assembly.htm Thu, 03 Mar 2022 00:00:00 +0530 We are offering Lister 8/1 and 16/2 PISTON Assembly Pt No 574-10350 Includes Piston Ring set of 4 Rings (1+2+1) consisting of Chromed taper compression ring DEV 614/888 (x1), Compression ring DEV 10-4-18 (x2) and Oil scraper ring DEV 23/22/99 (x1) set of 1+2+1 Lister 9/1 JP Piston Assembly https://www.devengineparts.com/lister-9-1-jp-piston-assembly.htm https://www.devengineparts.com/lister-9-1-jp-piston-assembly.htm Thu, 03 Mar 2022 00:00:00 +0530 Unlike Lister CS the piston Pin bore and pin is of larger in dia. Fits all Lister 9/1 JP JP2 JP3 JP4 & JP6 engines with standard bore of 114.30 mm or 4.500 inch   We are offering Lister 9/1 JP PISTON Assembly Pt No DEV 573-10430   Lister 9/1 JP PISTON Assembly.   A standard Aluminum LM13 Alloy piston for use in Lister 9/1 & JP Series engines.   Comes complete with a gudgeon pin and a pair of cir-clip.   We Are also offering Free piston ring set along with it.   Includes Piston Ring set of 4 Rings (1+2+1) consisting of Chromed taper compression ring DEV 614/888 (x1), Compression ring DEV 10-4-18 (x2) and Oil scraper ring DEV 23/22/99 (x1) set of 1+2+1 Bukh Engine DV10 DV20 Piston Assembly https://www.devengineparts.com/bukh-engine-dv10-dv20-piston-assembly.htm https://www.devengineparts.com/bukh-engine-dv10-dv20-piston-assembly.htm Thu, 03 Mar 2022 00:00:00 +0530 Bukh DV20 DV10 Piston Set Pt No DEV 008E7317 We are pleased to offer Graded LM13 Aluminum Alloy replacement piston of standard Size Fits all Bukh DV10 and Bukh DV20 Series engines, comes complete with Ring Set, a gudgeon pin and a pair of circlips. Widely used in Marine and Industrial engines of single or Multi Cylinder with Standard Bore 85mm. Please select the correct Quantiy for your engine. A Single Cylinder Bukh D10 & DV10 will require 1 Set and a 2 Cylinder DV20 Marine Diesel Engine will require 2 Set to make a complete set to run the engine. Suitable for BUKH Marine Diesel Engine DV10 DV20 Engines Bore X Stroke – 3.35″ x 3.35 in (85 x 85 mm)   Bukh DV10 DV20 Piston Assembly Part No DEV 008E7317 with bore 85mm and stroke 85mm   Piston Assembly Comprising DEV 008E7317 Stempel Komplet med pind og ringe Kolben Komplett mit Bolzen und Ringen pistón Completo con pasador e aneis piston complet avec goupille et anneaux pistón completo con pasador y anillos 1 Piston DEV 008E2949   Stempel Kolben Pistón 2 Piston Ring Set Comprising DEV 030D0301 ##   Stempelringesæt, Kolbenringsatz, Conxunto de aneis do pistón, Jeu d’anneaux de piston, Juego de anillos de pistón 3 CIRCLIP  DEV 522A0032   Seegerring Sicherungsring Clip 4 GUDGEON PIN DEV 520T0005   Stempelpind Kolbenbolzen pasador de pistón goujon de piston pin de pistón de pistón Bukh Engine DV20 DV10 Oil Seal Set https://www.devengineparts.com/bukh-engine-dv20-dv10-oil-seal-set.htm https://www.devengineparts.com/bukh-engine-dv20-dv10-oil-seal-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Bukh DV20 DV10 Lip Seal Set A replacement Oil Seal Set or Lip Seal Set for Bukh Marine Diesel Engine suitable for DV20 and DV10 ENGINE. 1 No Oil Seal Ring Part No 561B0351 or Pt No 561B0356 ⌀35 1 No Oil Seal Ring Part No 561B0600 or Pt No 561B0602 or PN 000E8532 ⌀60   Bukh Engine DV20 DV24 DV29 DV32 Main Bearing Liner Set https://www.devengineparts.com/bukh-engine-dv20-dv24-dv29-dv32-main-bearing-liner-set.htm https://www.devengineparts.com/bukh-engine-dv20-dv24-dv29-dv32-main-bearing-liner-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides Main Bearings Set We can also supply following Parts : Connecting rod bearing shells, - 40563 / 000E0563 (Standard / Under Size) DV20, DV24, DV29, DV32, DV36 and DV48 Big End Bearings / Plejlstangspander, sæt / Pleuellager, Satz Main bearing liner - 000E 4765 / 000E4765 (Standard / Under Size) DV36 and DV48 Hovedlejeforing, standard Hauptlager, Laufbuchse   A high quality replacement Bimetal bearings for Bukh DV20, DV24, DV29 and DV32 2 CYL MARINE DIESEL ENGINE.   Also Suitable for Single Cylinder DV10 Engines.   SABB 2G 2GZ P4 Maintenance Set https://www.devengineparts.com/sabb-2g-2gz-p4-maintenance-set.htm https://www.devengineparts.com/sabb-2g-2gz-p4-maintenance-set.htm Thu, 03 Mar 2022 00:00:00 +0530 maintenance set of gaskets p4 for sabb 2g 2gz water cooled marine engine art no: 0033886.   includes makers ref : 0033886 for component – 04012407 – cylinder head Bukh Engine DV24 DV29 DV32 Piston Ring https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-piston-ring.htm https://www.devengineparts.com/bukh-engine-dv24-dv29-dv32-piston-ring.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679, Bukh DV36 DV48 Piston Ring Set Part No 030D0304 or 033D0301 with Bore X Stroke – 3.35″ x 3.35 in (85 x 85 mm) Bukh DV24 DV29 DV32 Piston Ring Part No DEV 030D0304. A high quality replacement Piston Ring Set for Bukh 2 Cylinder Marine diesel Engine. Bukh Piston Ring Set Part No DEV 030D0304  a Part of Piston Assembly DEV 008E7679. Ring Set is suitable for Bukh DV24, DV29 DV32, RM and RME. Bukh Engine DV36 DV48 Piston Ring Set https://www.devengineparts.com/bukh-engine-dv36-dv48-piston-ring-set.htm https://www.devengineparts.com/bukh-engine-dv36-dv48-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Besides these we can also supply following Parts : - Big End Bearings Part No 40563 / 000E 0563  DV20 DV24 DV29 DV36 DV32 DV48 - Main bearing liner Part No 000E 4765 / 000E4765  DV36 - Bukh DV24 DV29 DV32 Engine PISTON Assembly 008E7679 and Bukh DV36 DV48 Engine PISTON Assembly 008E4865, Bukh DV36 DV48 Piston Ring Set Part No 030D0304 or 033D0301 with Bore X Stroke – 3.35″ x 3.35 in (85 x 85 mm) A high quality replacement Piston Ring Set for Bukh DV36 DV48 Piston Ring Set 033D0301 Bukh Piston Ring Set Part No 030D0304 or 033D0301  a Part of Piston Assembly 008E7679 or 008E4865 Ring Set is suitable for Bukh DV24, DV24 ME, DV24 RME, DV29, DV29 ME, DV29 RME, DV32. Also suitable for DV32 ME, DV32 RME, DV36, DV36 ME, DV36 RME, DV48, DV48 ME and DV48 RME Lister 9/1 JP JS JK Piston Ring Set https://www.devengineparts.com/lister-9-1-jp-js-jk-piston-ring-set.htm https://www.devengineparts.com/lister-9-1-jp-js-jk-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Please don't get confused as many people are using CS 5/1 with 574-10980 ring set instead JP which has Tapper top ring. NOTE -If you have Non-Chrome Liner Please Mention AS YOU WILL NEED CHROMED TAPPER COMPRESSION RING Refer our other listed product for the same.   A quality piston ring set for use in Lister 9/1 JP, JS and JK Series engines.   Set of 4 Rings (1+2+1) consisting of Plain taper compression ring DEV 614/888 (x1),(See note) Compression ring DEV 10-4-18 (x2) and   Oil scraper ring DEV 23/22/99 (x1) set of 1+2+1   A total of three compression and one oil scraper all Non-Chromed Rings   Fits all Lister 9/1 JP JP2 JP3 JP4, JP6, JK4 and JS engines with standard bore of 114.30 mm or 4.5″ alloy pistons with part number 573-10430. Lister 9/1 JP JS JK PISTON RING SET Part No Dev-574-10980.   For use in Chromed bores only. Lister 9/1 JP JS JK Piston Ring Set TC https://www.devengineparts.com/lister-9-1-jp-js-jk-piston-ring-set-tc.htm https://www.devengineparts.com/lister-9-1-jp-js-jk-piston-ring-set-tc.htm Thu, 03 Mar 2022 00:00:00 +0530 Please don't get confused as many people are using CS 5/1 with 574-10990 ring set instead JP which has Tapper top ring. NOTE -If you have Chrome Liner Please Mention AS YOU WILL NEED NON-CHROMED TAPPER COMPRESSION RING Refer our other listed product for the same.   A quality piston ring set for use in Lister 9/1 JP, JS and JK Series engines.   Fits all Lister 9/1 JP JP2 JP3 JP4, JP6, JK4 and JS engines with standard bore of 114.30 mm or 4.5″ alloy pistons with part number 573-10430.Chromed Piston Ring Set Part No Dev-574-10990 For use in Non-Chromed bores only.   Set of 4 Rings (1+2+1) consisting of Chromed taper compression ring DEV 614/888 (x1),(See note) Compression ring DEV 10-4-18 (x2) and Oil scraper ring DEV 23/22/99 (x1) set of 1+2+1   A total of three compression and one oil scraper all Non-Chromed Rings Lister FR FRM Piston Ring Set https://www.devengineparts.com/lister-fr-frm-piston-ring-set.htm https://www.devengineparts.com/lister-fr-frm-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Lister FR PISTON RING SET Comprising DEV 570-33370 Part of PISTON ASSEMBLY Part No DEV – 571-10050 Lister FR FRM PISTON RING SET standard Size for 95.25mm or  3.75in Bore. single or Multi Cylinder FR1, FR2, FR3, FR4, FR6, FR1M, FR2M, FR3M, FR4M & FR6M Engine. Lister Petter FR FRM Standad Bore 95.25mm / 3.75in / 3 3/4 Bore. Lister HR HRS HL Piston Ring Set https://www.devengineparts.com/lister-hr-hrs-hl-piston-ring-set.htm https://www.devengineparts.com/lister-hr-hrs-hl-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: We are pleased to offer Quality replacement piston rings of standard Size Fits all Lister Petter HR HRS HRW HRWS & HL Series engines. Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder HL4, HL6, HLT6, HR2, HR3, HR4, HR6, HR2M, HR3M, HR4M, HR6M, HRS6, HRS6M, HRW2, HRW3, HRW4, HRW6, HRW2M, HRW3M, HRW4M, HRW6M, HRWS6 & HRWS6M. Lister HR HRS HL PISTON RING SET Part No DEV 572-50622. A Part of HR Piston Assy Pt No Dev 572-50122. PISTON RING SET suitable for Lister HR HRS HRW HRWS HL engine. Lister LR LRM Piston Ring Set https://www.devengineparts.com/lister-lr-lrm-piston-ring-set.htm https://www.devengineparts.com/lister-lr-lrm-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A Piston Ring set Part NO DEV 570-12120 is a part of complete piston assembly Comprising DEV 570-11308. PISTON RING SET Comprising DEV – 570-12120. LISTER LR LRM Piston Ring Set Part NO DEV 570-12120. A quality Piston Ring Set Suitable For LR , LR2, LR1M & LR2M Engines Bore 76.20 mm or 3.000″. A Single Cylinder engine will need a single set a 2 cylinder Engine will need 2 Sets. Lister LR series Single And multi cylinder are used as Stationary Engine, Industrial Engine and Marine Engine. Lister LT Piston Ring Set https://www.devengineparts.com/lister-lt-piston-ring-set.htm https://www.devengineparts.com/lister-lt-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A Piston Ring set of Lister LT DEV 601-50400 is a part of complete piston assembly Comprising DEV 601-511453. Piston Ring Set – Std  P/N DEV 601-50400. Lister LT Piston Ring Set Part No DEV 601-50400. For LT & LT2 Engines Standard Bore 82.55 or 3.25″. A Single Cylinder engine will need a single set a 2 cylinder Engine will need 2 Sets. Lister LT series Single And multi cylinder are used as Stationary Engine, Industrial Engine and Marine Engine. Lister Petter TR TL Piston Ring Set https://www.devengineparts.com/lister-petter-tr-tl-piston-ring-set.htm https://www.devengineparts.com/lister-petter-tr-tl-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder TR1, TR2, TR3, TL2, TL3. These will fit all TR engines, and TL engines from 1985 onwards, so from 3500064TL2 and 3500231TL3. TL engines prior to these numbers used a four ring piston; the three ring set can be used, however does not include the additional oil scraper ring. In case needed please contact us before ordering.   PISTON RING SET Comprising Part No DEV 570-33370. PISTON RING SET is A part of PISTON ASSEMBLY 570-33360. Lister Petter TR TL PISTON RING SET Part No DEV 570-33370. Quality replacement piston rings of standard Size. Lister Petter TR / TL Series engines  Bore 98.425mm or 3.875in or 3 7/8″. Please select the correct size for your engine. Lister SR SW Piston Ring Set https://www.devengineparts.com/lister-sr-sw-piston-ring-set.htm https://www.devengineparts.com/lister-sr-sw-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 A Piston Ring set DEV 570-12140 is a part of complete piston assembly Comprising DEV 570-10940 These PISTON Ring set suitable for LISTER Petter SR, SR2, SR3, SW1, SW2 and SW3 Engines. Our offer is for Lister SR and SW PISTON RING SET Part No DEV 570-12140 Lister SR SW Piston Rings Set. For SR Air Cooled Engine and SW Water Cooled Engine Bore 88.90 mm or 3.500″ or 3 1/2. Lister SR and SW series Single And multi cylinder engines. Lister ST TS STW Piston Ring Set https://www.devengineparts.com/lister-st-ts-stw-piston-ring-set.htm https://www.devengineparts.com/lister-st-ts-stw-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: PISTON RING SET for Lister ST/TS/STW Part No DEV 570-12910 Lister ST, STW and TS series Single And multi cylinder are used as Stationary Engine, Industrial Engine and Marine Engine. Lister ST TS STW Piston Ring Set Part No DEV 570-12910. A part of complete piston assembly Comprising DEV 570-12840. Suitable For ST & TS Air Cooled Engine and STW Water Cooled Engine Bore 95.25 mm / 3.750″ / 3 3/4″. Mack E6 Piston Ring 353GC2139 https://www.devengineparts.com/mack-e6-piston-ring-353gc2139.htm https://www.devengineparts.com/mack-e6-piston-ring-353gc2139.htm Thu, 03 Mar 2022 00:00:00 +0530 Mack E6 Piston Ring Set Part No  DEV 353GC2139 with Bore 123.82mm : Suitable for Trucks, Heavy Commercial Vehicles or HCV etc Can be used with EPA-8074, EPA-8075 and EPA-8076 6 sets will be require for 6 Cylinder Mack E6 Engine A quality aftermarket Piston Ring Set suitable for Mack E6 Series engine.. Each order will contain 1 Set of Piston Rings (3.17 + 3.17 + 3.17 + 4.72) (2) 1/8″ Keystone Plasma (1) 1/8″ Keystone Chrome, Tapered Face (1) 3/16″ Oil, Wide Rail Mack E7 Piston Ring 353GC214 https://www.devengineparts.com/mack-e7-piston-ring-353gc214.htm https://www.devengineparts.com/mack-e7-piston-ring-353gc214.htm Thu, 03 Mar 2022 00:00:00 +0530 Mack E7 Piston Ring Set Part No  DEV 353GC214 with Bore 123.82mm : Suitable for Trucks, Heavy Commercial Vehicles or HCV etc. 6 sets will be require for 6 Cylinder Mack E7 Engine. A quality aftermarket Piston Ring Set suitable for Mack E7 Series engine. 1 PISTON RING SET Comprising DEV 353GC2142. Each order will contain 1 Set of Piston Rings (3.17 + 2.37 + 4.72). (1) Keystone Plasma – 3.17mm or 0.125″ (1) Keystone Chrome, Tapered Face 2.37mm or 0.093″ (1) 3/16 Oil, Wide Rail – 3.17mm or 0.1875″ Petter PAZ1 Piston Ring Set https://www.devengineparts.com/petter-paz1-piston-ring-set.htm https://www.devengineparts.com/petter-paz1-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A new replacement Quality Piston Ring set Suitable for Petter PAZ engines with a Cylinder bore – 3.000″ or 76.20mm. A Dev Brand piston Ring set Have Top-Ring Chromed. Petter PAZ1 Piston ring Set. One Ring Set for a Single Cylinder Lister Petter PAZ1 Engine Pt No DEV 391460. A Part of PISTON ASSEMBLY Comprising Dev 340701/ DEV 364619. Besides above spares we can also supply Con Rod and Main Bearings, Piston for PAZ Engine. Petter PH PH2 PHW Piston Ring Set https://www.devengineparts.com/petter-ph-ph2-phw-piston-ring-set.htm https://www.devengineparts.com/petter-ph-ph2-phw-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: PH & PH2 PISTON RING SET  Part No DEV 365363 / DEV 364789. One Ring Set is suitable for a Single Cylinder Engine ie PH. For PH2 Kindly buy Two Ring Sets. Petter PH PH2 PHW Piston Ring Set. Quality Piston Ring for Petter PH / PH2 type engines with a Cylinder bore – 87.30 mm / 3.437″. A Dev Brand piston Ring set Have Top-Ring Chrome, Pin & Clip. SABB 2J Piston Ring Set https://www.devengineparts.com/sabb-2j-piston-ring-set.htm https://www.devengineparts.com/sabb-2j-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 A quality Replacement Piston Ring Set Suitable For SABB 2J Diesel engine with standard bore of 100mm Diesel Tractor Motor Engine. 2 cylinder Engine Will Need 2 Sets   SABB 2J Piston Ring Set 100mm Bore   Part No S1-2J32005-002601 OR S1-2J32 005 – 002601.   A Part of PISTON Assembly S1-2J32005-002601 OR S1-2J32 005 – 002601   Piston Ring Set of consists of Top Compression Chrome Plated – 2J32 001 – 002597 OR 2J32001-002597 Compression Ring – 2J32 002 – 002598 OR 2J32001-002598 SPECIAL Oil Control Ring – 2J32 004 – 002600 OR 2J32001-002600 Comp Scraper Ring – 2J32 003 – 002599 OR 2J32001-002599 SABB G 2G Piston Ring Set https://www.devengineparts.com/sabb-g-2g-piston-ring-set.htm https://www.devengineparts.com/sabb-g-2g-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: Suitable for SABB G, 2G, 2GZ, 2GRG, 2GGRG, 2GGR, 2GHR, 2GRS, GG, GSP Diesel engine with standard bore of 90mm Diesel Engine. A Piston Ring Set Part No  DEV S1-G32b 003378 a part of Piston Assembly Set Part No DEV G32A – 00072 A quality replacement Piston Ring Set suitable for SABB G, 2G, 2GZ, 2GRG, 2GGRG, 2GGR, 2GHR, 2GRS, GG and GSP Series engine. We can also supply other parts like Piston, Bearings and Gasket for Sabb G 90   A Piston Ring Set Part No  DEV S1-G32b 003378 includes: Top Compression Chrome Plated Ring Pt No DEV G32b 00722 – 1 Pc Compression Ring Pt No DEV G32bb 00723                        – 1 Pc Special Oil Control Ring Pt No DEV G32bc 00724               – 1 Pc Comp Scraper Ring Pt No DEV G32bd 00725                      – 1 Pc A Piston Ring Set Part No  DEV S1 G32b 003378 a part of Piston Assembly Set Part No DEV G32A – 00072. SABB G 90mm Piston & Ring Set https://www.devengineparts.com/sabb-g-90mm-piston-ring-set.htm https://www.devengineparts.com/sabb-g-90mm-piston-ring-set.htm Thu, 03 Mar 2022 00:00:00 +0530 Suitable for SABB G, 2G, 2GZ, 2GRG, 2GGRG, 2GGR, 2GHR, 2GRS, GG, GSP Diesel engine with standard bore of 90mm Diesel Engine.   Description: SABB Piston G32A-00072 & Piston Ring Set for G 2G Series Water Cooled Marine Diesel Engine a 90mm Bore Engine. A Piston Assembly Set consists of Piston, and Piston ring set Piston Part No DEV G32A – 00072 – 1 Pc Piston Ring Set PN  DEV 003378 – 1 Set We can also supply other parts like Piston, Bearings and Gasket for Sabb G 90   Gudgeon Pin  Pt No H32d 001450 and Cerclip PN 734034 Not included Piston Ring Set includes Top Compression Chrome Plated – G32b 00722 Compression Ring – G32bb 00723 Special Oil Control Ring – G32bc 00724 Comp Scraper Ring – G32bd 00725 SABB G Piston Assembly https://www.devengineparts.com/sabb-g-piston-assembly.htm https://www.devengineparts.com/sabb-g-piston-assembly.htm Thu, 03 Mar 2022 00:00:00 +0530 Suitable for SABB G, 2G, 2GZ, 2GRG, 2GGRG, 2GGR, 2GHR, 2GRS, GG, GSP Diesel engine with standard bore of 90mm Diesel Engine.   Piston Ring Set includes Top Compression Chrome Plated – G32b 00722 Compression Ring – G32bb 00723 Special Oil Control Ring – G32bc 00724 Comp Scraper Ring – G32bd 00725   Description SABB G Piston G32A-00072  and Piston Ring Set for SABB G 2G Series Water Cooled Marine Diesel Engine a 90mm Bore Engine. A Piston Assembly Set consists of Piston, Piston  ring and Gaugeon Pin and Cerclip. Piston Part No DEV G32A – 00072 – 1 Pc Piston Ring Set PN  DEV 003378 – 1 Set Gudgeon Pin  Pt No H32d 001450 – 1 Pc and Cerclip PN 734034 – 1 Set We can also supply other parts like Piston, Bearings and Gasket for Sabb G 90 Elliott Turbine Bearing Liner 4122232 https://www.devengineparts.com/elliott-turbine-bearing-liner-4122232.htm https://www.devengineparts.com/elliott-turbine-bearing-liner-4122232.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A new Split Type Liner Bearing Metal Shell  upper Half a Replacement Spare Parts for Turbines. We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc. These are made from high quality Babbitt Material We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed. This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo. Bearing Liner Top 412223-2 Elliott Turbine Bearing Liner 4122233 https://www.devengineparts.com/elliott-turbine-bearing-liner-4122233.htm https://www.devengineparts.com/elliott-turbine-bearing-liner-4122233.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A new Split Type Liner Bearing Metal Shell Lower Half a Replacement Spare Parts for Turbines. Bearing Liner Bottom 412223-3  We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc. These are made from high quality Babbitt Material We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed. This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo. Elliott Turbine Bearing Liner 4122702 https://www.devengineparts.com/elliott-turbine-bearing-liner-4122702.htm https://www.devengineparts.com/elliott-turbine-bearing-liner-4122702.htm Thu, 03 Mar 2022 00:00:00 +0530 A new Split Type Liner Bearing Metal Shell Lower and upper Half a Replacement Spare Parts for Turbines. Bearing Liner Bottom 412270-3 and Bearing Liner Top 412270-2   Description: We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top Half Pc. These are made from high quality Babbitt Material We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed. This is a Liner Bearing, lower and upper Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo. Elliott Turbine Bearing Liner 4122703 https://www.devengineparts.com/elliott-turbine-bearing-liner-4122703.htm https://www.devengineparts.com/elliott-turbine-bearing-liner-4122703.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A new Split Type Liner Bearing Metal Shell Lower Half a Replacement Spare Parts for Turbines. Bearing Liner Bottom 412270-3 A Brand New Pair of Elliott Stem Turbine Bearing Bottom Half Piece. Made from high quality Babbitt Material. Elliott Turbine Lower Bearing 60336023 https://www.devengineparts.com/elliott-turbine-lower-bearing-60336023.htm https://www.devengineparts.com/elliott-turbine-lower-bearing-60336023.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: A new Split Type Liner Bearing Metal Shell Lower or Bottom Half a Replacement Spare Parts Of New Elliott Group Steam Turbines. Bearing Liner Bottom 603360-23. We are offering a Brand New Pair of Elliott Stem Turbine Bearing Bottom Half Pc. These are made from high quality Babbitt Material. We can also supply other Elliott Stem Turbine Bearings in Babbitt alloy in case needed. This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo. Elliott Turbine Top Bearing 60336042 https://www.devengineparts.com/elliott-turbine-top-bearing-60336042.htm https://www.devengineparts.com/elliott-turbine-top-bearing-60336042.htm Thu, 03 Mar 2022 00:00:00 +0530 Description: We are offering a Brand New Pair of Elliott Stem Turbine Bearing Upper Half Pc. These are made from high quality Babbitt Material. We can also supply other Elliott Stem Turbine Bearings in Babbitt alloy in case needed. A new Split Type Liner Bearing Metal Shell Upper or Top Half a Replacement Spare Parts Of New Elliott Group Steam Turbines. This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo. Shinko RB4 Turbine Metal Bearing Q2260-7 https://www.devengineparts.com/shinko-rb4-turbine-metal-bearing-q2260-7.htm https://www.devengineparts.com/shinko-rb4-turbine-metal-bearing-q2260-7.htm Thu, 03 Mar 2022 00:00:00 +0530 These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c, Shinko RB4 Turbine Bearing Metal Pt No Q2260-7We are offering a Brand New Pair of Shinko Turbine Pump Bearing Set of Top Half and Bottom Half Pc. These are Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets. Shinko RB4 Turbine Bearing Metal Pt No Q2260-7. A new Split Type Shell Metal Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of Shinko IND. LTD. Cargo Oil Pump Turbine . Bearing Metal Part No DEV Q2260-7 or RP 2115. Dwg Th61001  Model-Rx1 / RB4. Shinko RB4 Turbine Bearing Metal Q2260-8 https://www.devengineparts.com/shinko-rb4-turbine-bearing-metal-q2260-8.htm https://www.devengineparts.com/shinko-rb4-turbine-bearing-metal-q2260-8.htm Thu, 03 Mar 2022 00:00:00 +0530 These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c, We are offering a Brand New Pair of Shinko Turbine Pump Bearing Set of Top Half and Bottom Half Pc. These are Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets. Shinko RB4 Turbine Bearing Metal Q2260-8. A new Split Type Shell Metal Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of Shinko IND. LTD. Cargo Oil Pump Turbine . Bearing Metal Part No Q2260-8 or 2116 Dwg Th61001  Model-Rx1 / RB4 Shinko RB4 Turbine Thrust Bearing Metal 2270-8 https://www.devengineparts.com/shinko-rb4-turbine-thrust-bearing-metal-2270-8.htm https://www.devengineparts.com/shinko-rb4-turbine-thrust-bearing-metal-2270-8.htm Thu, 03 Mar 2022 00:00:00 +0530 These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c, We are offering a Brand New Pair of Shinko Turbine Pump Thrust Bearing Set of Top Half and Bottom Half Pc. These are Babbitt Based Bearings are made from high quality Material as per OE JIS WJ2 S25C. Shinko RB4 Turbine Thrust Bearing Metal Q 2270-8. A new Split Type White Metal With Steel Thrust Bearing Metal  2 Pc a Replacement Spare Parts Of Shinko IND. LTD. Cargo Oil Pump Turbine . Bearing Metal Part No Q2270-8 or 2118 Dwg Th61001  Model-Rx1 / RB4